Free UPS Ground shipping on online orders over $750.

Vaniman Large Accumulator for 2-1-2 – VMC – A300

Description

The Vaniman Large Accumulator is a pre filter cyclone for dust collectors. It acts as a dust separator that uses a cyclonic motion to push debris and dust to the bottom container while allowing separated air to be pulled into the dust collector prolonging dust collector filter and motor life.

    Product Features

    • Easily Integrates Into Any Dust Collection System
    • Removable Debris Capture Bucket
    • Highly Durable Molded Resin Design
    • Scientifically Tested and Proven to Separate Dust
      • A 3M/Georgia Tech Study
    • Up To 95% Cyclonic Separation Rate of Particles Down to .3 Micron
    • 95% Effective at Precious Metal Reclamation
    • Includes Mounting Bracket

    Connects to the following

    • 2.5″ Vaniman Suction hoses
    • VMC-1030 Adaptor
    • VMC-1021 Adaptor
    • Inlet/Outlet Ports – OD: 2.5 – ID: 2.25

    Save money on filter bags

    The cyclone pre-filter helps to save money by lengthening the life of the dust collector’s filter or filter bag. By capturing the vast majority of the dust particles before they reach the dust collector, the filter bag can be used solely for the percolation of small particles. The filter bags will not become full as fast, saving money otherwise spent on replacements.

    Save time on maintenance

    The bucket on the Accumulator is a breeze to empty. With no replaceable parts, there are no parts to ship and fewer bags needed for replacement. There are also no moving parts during operation, which means there’s no wear. There is also less time spent opening the unit, which means less down time for workstations.

    Extend the motor life

    As a filter bag becomes fuller, the motor has to work harder to pull the air through the congested bag. The overworked motor will overheat and can even pop the thermal fuse. Extended use at these rough conditions will decrease the life of the brushes and the overall life of the motor. Applying the cyclone filter gives relief to the stress on the motor.

    When should I use a cyclone filter Accumulator?

    Heavy dust collection

    In applications such as sandblasting, an Accumulator is a must. Excessive amounts of heavy material in a filter bag can cause it to fail and allow dust particulates into the motor, causing failure. With a cyclone filter Accumulator, the dust collector’s filter is needed to capture only the smallest of particulates for which it was specially designed.

    Collecting precious metals

    The cyclone pre-filter provides an easy way to collect precious metals. While using a high speed hand tool on jewelry gold, a dust collector with an Accumulator will save the gold dust and allow it to be easily extracted.

    More technologically advanced industries benefit as well. Expensive coating materials (such as those used by the aerospace industry in a Vaniman sandblaster) can be reclaimed, providing big savings for the user.

    Vaniman Large Accumulator for 2-1-2 – VMC – A300

    Product form

    Free pickup in our shop(s)

    SKU: VMC-A300

    $184.37

      Description

      The Vaniman Large Accumulator is a pre filter cyclone for dust collectors. It acts as a dust separator that uses a cyclonic motion to push debris and dust to the bottom container while allowing separated air to be pulled into the dust collector prolonging dust collector filter and motor life.

        Product Features

        • Easily Integrates Into Any Dust Collection System
        • Removable Debris Capture Bucket
        • Highly Durable Molded Resin Design
        • Scientifically Tested and Proven to Separate Dust
          • A 3M/Georgia Tech Study
        • Up To 95% Cyclonic Separation Rate of Particles Down to .3 Micron
        • 95% Effective at Precious Metal Reclamation
        • Includes Mounting Bracket

        Connects to the following

        • 2.5″ Vaniman Suction hoses
        • VMC-1030 Adaptor
        • VMC-1021 Adaptor
        • Inlet/Outlet Ports – OD: 2.5 – ID: 2.25

        Save money on filter bags

        The cyclone pre-filter helps to save money by lengthening the life of the dust collector’s filter or filter bag. By capturing the vast majority of the dust particles before they reach the dust collector, the filter bag can be used solely for the percolation of small particles. The filter bags will not become full as fast, saving money otherwise spent on replacements.

        Save time on maintenance

        The bucket on the Accumulator is a breeze to empty. With no replaceable parts, there are no parts to ship and fewer bags needed for replacement. There are also no moving parts during operation, which means there’s no wear. There is also less time spent opening the unit, which means less down time for workstations.

        Extend the motor life

        As a filter bag becomes fuller, the motor has to work harder to pull the air through the congested bag. The overworked motor will overheat and can even pop the thermal fuse. Extended use at these rough conditions will decrease the life of the brushes and the overall life of the motor. Applying the cyclone filter gives relief to the stress on the motor.

        When should I use a cyclone filter Accumulator?

        Heavy dust collection

        In applications such as sandblasting, an Accumulator is a must. Excessive amounts of heavy material in a filter bag can cause it to fail and allow dust particulates into the motor, causing failure. With a cyclone filter Accumulator, the dust collector’s filter is needed to capture only the smallest of particulates for which it was specially designed.

        Collecting precious metals

        The cyclone pre-filter provides an easy way to collect precious metals. While using a high speed hand tool on jewelry gold, a dust collector with an Accumulator will save the gold dust and allow it to be easily extracted.

        More technologically advanced industries benefit as well. Expensive coating materials (such as those used by the aerospace industry in a Vaniman sandblaster) can be reclaimed, providing big savings for the user.

        Reviews

        Vaniman Large Accumulator for 2-1-2 – VMC – A300

        Vaniman Large Accumulator for 2-1-2 – VMC – A300

        0 out of 5 stars

        This product has no reviews yet

        Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account