Aidite Full Biomic Aesthetic Liquid, Modeling/Diluent

Coloring liquid 1 is used for all 2D staining pastes and serves as a diluent. If a thin layer of paste needs to be applied, it can be used to reduce the viscosity of the paste.

Coloring liquid 2 is for 3D pastes.

When the Glaze-F paste is too thick, you can use the coloring liquid to reduce the viscosity of the paste. The glaze F will also have a glazing effect.

Before using, stir the paste thoroughly with a glass rod to achieve good consistency before adding and adjusting. Too much use of the coloring liquid 1 may affect the operation.

Do not add the coloring liquid directly into the paste bottle and stir it. It is recommended to mix it with the paste on the palette. Be sure that the paste has been mixed thoroughly to the correct consistency.