Small Accumulator pre filter cyclone dust collector acts as a dust separator, using cyclonic motion to separate debris and dust form the air prior to getting to the dust collector filter and motor.
- Removable Debris Capture Bucket
- Highly Durable Molded Resin Design
- Up To 95% Cyclonic Separation Rate of Particles Down to .3 Micron
Connects to the following
- 1.5″ Vaniman Suction Hoses
Save money on filter bags
The cyclone pre-filter helps to save money by lengthening the life of the dust collector’s filter or filter bag. By capturing the vast majority of the dust particles before they reach the dust collector, the filter bag can be used solely for the percolation of small particles. The filter bags will not become full as fast, saving money otherwise spent on replacements.
Save time on maintenance
The bucket on the Accumulator is a breeze to empty. With no replaceable parts, there are no parts to ship and fewer bags needed for replacement. There are also no moving parts during operation, which means there’s no wear. There is also less time spent opening the unit, which means less down time for workstations.
Extend the motor life
As a filter bag becomes fuller, the motor has to work harder to pull the air through the congested bag. The overworked motor will overheat and can even pop the thermal fuse. Extended use at these rough conditions will decrease the life of the brushes and the overall life of the motor. Applying the cyclone filter gives relief to the stress on the motor.
When should I use a cyclone filter Accumulator?
Heavy dust collection
In applications such as sandblasting, an Accumulator is a must. Excessive amounts of heavy material in a filter bag can cause it to fail and allow dust particulates into the motor, causing failure. With a cyclone filter Accumulator, the dust collector’s filter is needed to capture only the smallest of particulates for which it was specially designed.
The cyclone pre-filter provides an easy way to collect precious metals. While using a high speed hand tool on jewelry gold, a dust collector with an Accumulator will save the gold dust and allow it to be easily extracted.
More technologically advanced industries benefit as well. Expensive coating materials (such as those used by the aerospace industry in a Vaniman sandblaster) can be reclaimed, providing big savings for the user.