Quatro Retrofit Motor for AF500 Unit

This kit contains the Motor, Motor Cone, 20 UF Capacitor, Motor Screws, Cable Ties, and Rubber Grommet for Motor Bracket Screws.

How to retrofit:

In order to use the new replacement motor for the old AF500 units, the following procedure must be followed:

1. The height between the floor and the motor mounting bracket must be 5”. This can be done by adding a piece of plywood on each side until the height is reached. Longer screws will be needed as well.

  2. If the capacitor rating is higher or lower than 20UF, it must be changed