Free UPS Ground shipping on orders over $750. Online orders only.

BEGO VarseoSmile Temp A2, 250g

Description

The tooth-colored resin for 3D printing of temporary crown and bridge restorations, inlays, onlays, and veneers.

Advantages for the laboratory

  • Specially for the resin developed printing and processing parameters ensure an accurate fit and smooth production sequences with reproducible results at any time
  • Easy finishing due to smooth surfaces of the printed objects
  • Objects already printed can be supplemented and repaired outside the patient‘s mouth with VarseoSmile Temp while maintaining stability – or will simply be reprinted due to low material costs
  • Extremely short fabrication times and low material consumption equate to cost-efficient production in the laboratory
  • Three shades according to the proven VITA* classical shades: A2, A3, C2
  • VarseoSmile Temp: FDA 510(k) cleared and meets all the requirements for a Class II medical device**

Advantages for the patient

  • The finished restoration can be attached using conventional temporary cements
  • Certified biocompatibility
Medical class Class IIa*
Colour A2 Dentin, A3 Dentin, C2 Dentin**
Modulus of elasticity ≥ 3.500 MPa
Viscosity 2 500 à 6 000 MPa.s
Density at 22°C approx. 1,4 – 1,5 g/cm3
Layer thickness 50 μm
Flexural strength ≥ 100 MPa
Wavelength 405 nm

 

Validated for Bego Varseo XS, Varseo S, Varseo/Varseo L, Asiga Max UV, Asiga Max, FormLabs Form 3B, FormLabs Form 2, FormLabs Form 3B+, SprintRay Pro 95 and Pro 95S, SprintRay Pro 55 and 55S, Dekema Trix Print, Ackuretta Dentiq and Freeshape 120, Ackuretta SOL, Microlay Versus 385, Whip Mix VeriBuild, Whip Mix VeriEko, Envision TEC D4K Pro, RapidShape D20+, RapidShape D30+

    BEGO VarseoSmile Temp A2, 250g

    Product form

    Free pickup in our shop(s)

    SKU: 41102US

    $152.97

      Description

      The tooth-colored resin for 3D printing of temporary crown and bridge restorations, inlays, onlays, and veneers.

      Advantages for the laboratory

      • Specially for the resin developed printing and processing parameters ensure an accurate fit and smooth production sequences with reproducible results at any time
      • Easy finishing due to smooth surfaces of the printed objects
      • Objects already printed can be supplemented and repaired outside the patient‘s mouth with VarseoSmile Temp while maintaining stability – or will simply be reprinted due to low material costs
      • Extremely short fabrication times and low material consumption equate to cost-efficient production in the laboratory
      • Three shades according to the proven VITA* classical shades: A2, A3, C2
      • VarseoSmile Temp: FDA 510(k) cleared and meets all the requirements for a Class II medical device**

      Advantages for the patient

      • The finished restoration can be attached using conventional temporary cements
      • Certified biocompatibility
      Medical class Class IIa*
      Colour A2 Dentin, A3 Dentin, C2 Dentin**
      Modulus of elasticity ≥ 3.500 MPa
      Viscosity 2 500 à 6 000 MPa.s
      Density at 22°C approx. 1,4 – 1,5 g/cm3
      Layer thickness 50 μm
      Flexural strength ≥ 100 MPa
      Wavelength 405 nm

       

      Validated for Bego Varseo XS, Varseo S, Varseo/Varseo L, Asiga Max UV, Asiga Max, FormLabs Form 3B, FormLabs Form 2, FormLabs Form 3B+, SprintRay Pro 95 and Pro 95S, SprintRay Pro 55 and 55S, Dekema Trix Print, Ackuretta Dentiq and Freeshape 120, Ackuretta SOL, Microlay Versus 385, Whip Mix VeriBuild, Whip Mix VeriEko, Envision TEC D4K Pro, RapidShape D20+, RapidShape D30+

        Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account