ALL SALES FINAL!
EXPIRES 12/24 ONLY 2 AVAILABLE
These resins are available at a discount because they are either approaching their expiration date, or they have expired. Expiration dates are clearly listed. Expired resins are good to use to experiment with, but should not be used in production work.
The ceramic filled hybrid material for 3D printing of permanent restorations.
The VarseoSmile Crown plus material is used for 3D printing of permanent restorations such as single crowns, inlays, onlays, and veneers for anterior and posterior areas including occlusal surfaces.
VarseoSmile Crown plus is available in seven shades according to the VITA * classical shade system: A1 Dentin / A2 Dentin / A3 Dentin / B1 Dentin / B3 Dentin / C2 Dentin / D3 Dentin / BL Dentin
The light polymerization can be achieved with the BEGO Otoflash (two xenon stroboscopic lamps, flash frequency 10 Hz, light spectrum 300 – 700 nm) or with the HiLite Power*, Fa. Heraeus Kulzer* (one xenon stroboscope lamp, flash frequency 20 Hz, light spectrum 390 – 540 nm).
The final polymerized objects can be customized using commercially available veneering composites and composite stains. The instructions for use of the material manufacturer must be observed.
Advantages for the laboratory
- Specially for the resin developed printing and processing parameters ensure an accurate fit and smooth production sequences with reproducible results at any time
- The chemical and mechanical properties of the material are specially adapted to dental applications
- Versatile use: as a single crown on natural tooth or abutment, as an inlay, onlay and veneer, and as a veneer on metal frameworks
- Objects that have already been printed can be adapted and repaired outside the patient‘s mouth while maintaining stability with VarseoSmile Crown plus or will simply be reprinted due to low material costs
- Minimized resin sedimentation for easy handling, no mixing or shaking necessary with regular use
- Easy to grind and polish by using standard tools
- Seven shades according to the proven VITA* classical shades:
A1, A2, A3, B1, B3, C2, D3. Additionally available in BEGO Bleach shade.
- FDA 510(k) cleared and fulfills all the requirements for a Class II medical device**
- Thanks to the full integration into the digital workflow and the low material costs, a fast supply option with an excellent price-performance ratio is made possible
- Validated on many 3D printers from well-known manufacturers
Advantages for the practitioner
- The chemical and mechanical properties of the material are specially adapted to dental applications
- Easy to grind and polish by using customary tools
- FDA 510(k) cleared and fulfills all the requirements for a Class II medical device**
- Thanks to the full integration into the digital workflow and the low material costs, a fast supply option with an excellent price-performance ratio is made possible
- Scientifically proven high bond strength with commercially available luting agents
- Clear visibility of restorations made of VarseoSmile Crown plus on radiographs
- Secure fixing of printed objects in the patient‘s mouth with only minimal effort to prepare the contact surfaces
- Extensive scientific studies by renowned universities and institutes confirm the excellent features of the restorations made of VarseoSmile Crown plus
Advantages for the patient
- High aesthetics thanks to a balanced ratio of opacity and translucency
- Fluorescence of the printed objects resembles that of the natural tooth
- Low tendency to age and discolor thanks to very low water absorption
- Low plaque accumulation due to smooth surface
- High comfort thanks to low cold and heat sensitivity
- Antagonist-friendly material with mechanical buffering effect – ideal for implant-supported crowns
- Minimized formation of secondary caries thanks to a high adhesive bond with luting composites
- Certified biocompatibility
| Color |
A1, A2, A3, B1, B3, C2, D3, BL |
| Density |
approx. 1.4 – 1.5 g/cm³ |
| Viscosity |
2,500 – 6,000 mPa∙s |
| Flexural strength |
116 – 150 MPa* |
| Flexural modulus |
4,090 MPa |
| Hardness |
≥ 90 Shore D |
| Water solubility |
< 1 µg/mm³ |
| Water sorption |
< 12 µg/mm³ |
| Layer thickness |
50 μm |
| Wavelength |
385 nm and 405 nm |
Validated for Bego Varseo XS, Varseo S, Varseo/Varseo L, Asiga Max UV, Asiga Max, FormLabs Form 3B, FormLabs Form 3B+, SprintRay Pro 95 and Pro 95S, SprintRay Pro 55 and 55S, Dekema Trix Print, Ackuretta Dentiq and Freeshape 120, Ackuretta SOL, Microlay Versus 385, Whip Mix VeriBuild, Whip Mix VeriEko, Envision TEC D4K Pro, RapidShape D20+, RapidShape D30+
